Factory made hot-sale Automatic Ph Tester Meter Controller - Dissolved Oxygen Controller – JIRS Detail:
Description
■ DO-6850 online Dissolved Oxygen Temperature Transmitting Controller is a micro computerized precision instrument.
■ The large LCD display, English menu operation.
■ Multi-parameter display at the same time: the value of dissolved oxygen, temperature, output current, alarm points, etc. Intuitive and easy to read, and alarm for range over run
■ Screen displays alarm status and accompanied by a switch ON / OFF signal output.
■ Automatic Temperature Compensation: Automatic 0℃ to 60℃.
■ Communication function (optional): RS-485 communication interface (MODBUS protocol is partially compatible), 4 to 20 mA current output corresponding to the DO value can be set freely.
■ Notepad: can store 50 measurements, the user can record measurement data.
■ Hysteresis amount can be set freely to avoid frequent switching relay action.
■ Watchdog function: to ensure that the instrument will not crash.
■ Core devices from famous foreign brands.
■ Restore the factory settings. Power-down protection> 10 years.
Main technique Specification
Function Model |
DO-6800A, B, C online Dissolved Oxygen Temperature Transmitting Controller |
Measuring Range |
0.00 – 20.00 mg /L (ppm) 0 – 200.0 ug /L (ppd), (optional) 0-60℃, 0-100℃ (optional) |
Resolution |
0.1 ug/L, 0. 01 mg/L, 0.1℃ |
Accuracy |
ug/L: ±1.0%FS; mg/L:±0.5%FS, ±0.3℃ |
Display |
Large Screen Multi-parameters LCD |
Temp. Compensation |
NTC 10K, 0.0℃-60.0 ℃, 0-100℃ (optional), Automatic temperature compensation |
Current output |
isolation to protect, 4 ~ 20mA signal output |
Control output |
two sets of ON / OFF relay contacts, divided into the high point, low alarm signal, optically isolated output. |
Communication output |
Standard Modbus RS485 function to PC (optional) |
Contact capacity |
10A/220V AC (Resistive Load) |
Output load |
load <500Ω (0-10mA), load <750Ω (4-20mA) |
Power |
AC 220V±10%, 50/60Hz |
Working environment |
Ambient Temp. 0-60℃, Relative Humidity ≤90% |
Dimensions |
96×96×115mm(H X W X D), 0.9kgs |
Hole size |
91×91mm H X W) |
Installation Mode |
Panel Mounted |
Protection grade |
IP57 or IP 65 cover |
Application
Widely used in the detection and control of dissolved oxygen in various water treatments, boiler water deoxygenization, environmental monitoring, aquaculture and other fields.
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can guarantee our combined price competiveness and quality advantageous at the same time for Factory made hot-sale Automatic Ph Tester Meter Controller - Dissolved Oxygen Controller – JIRS , The product will supply to all over the world, such as: Israel, Cairo, Sao Paulo, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Austin Helman from Johor - 2017.01.11 17:15
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By jari dedenroth from Haiti - 2018.09.21 11:44