China Good quality Hydroponic Conductivity Sensor - Online Conductivity TDS Sensor CR-102P – JIRS factory and manufacturers

Good quality Hydroponic Conductivity Sensor - Online Conductivity TDS Sensor CR-102P – JIRS

Short Description:

Product Detail

Product Tags

Feedback (2)

We also supply merchandise sourcing and flight consolidation companies. We now have our very own manufacturing facility and sourcing business. We could present you with almost every kind of product relevant to our solution array for Online Conductivity Analyser Controller , Resistivity Transmitter 4-20ma , Online Pressure Transmitter , Welcome your enquiry, greatest service is going to be provided with full heart.

Good quality Hydroponic Conductivity Sensor - Online Conductivity TDS Sensor CR-102P – JIRS Detail:

Pls unpack and check that the sensor has been supplied undamaged and that it is the correct option as ordered. If you have any problems please contact your supplier.

Application
Widely used for industrial water, tap water, cooling water, pure water etc. Conductivity measurement.

Main technique specification

Name	Function
Cell Constant	0.05cm^-1 ( v ) 0.1cm^-1 ( ) 1.0cm^-1( ) 10.0cm^-1( )
Electrode structure	Bipolar
Electrode material	ABS ( ) 316L Stainless steel( v )
Temperature Sensor	NTC 10K ( v ) Pt 1000 ( ) Pt 100 ( )
Thread structure	½” NPT Thread
Working pressure	0～0.5MPa
Operating temperature	0～50℃
Cable length	Standard：5m or others(5-30m)

Dimensions drawing
Conductivity-meter5

Conductivity(TDS)/ Resistivity electrode dimensions

Installation and maintenance
Installation: To ensure the real measurement result, data distortion caused by air bubble or dead water in conductance cell should be avoided. The installation should be performed strictly according to the following drawing:

Conductivity-meter6

Notes
1. The electrode should be installed at a lower location in the pipe where the flow speed is steady and air bubbles are seldom generated.
2. No matter the conductance cell is horizontally or vertically installed, it should be deeply inserted into the moving water.
3. The conductivity/Resistivity signal is weak electronic signal and its collecting cable should be separately installed.
When threading cable joint or connecting terminal board is used, to avoid wetting interference or breakdown of measurement unit circuit, they should not be connected to the same group of cable joint or terminal board with the power or control line.
4. When the measurement cable needs to be lengthened, it’s recommended to use the cable provided by the original manufacturer, and the joint should be subject to reliable damp-proofing insulation disposal. When a longer distance is involved, the length of the cable (<30m) should be agreed on before delivery, and if the length is over 30m, a transmitter should be used.

Electrode Maintenance
1. The electrode cell should not be soaked in strong acid or alkali liquid, and the platinum black coating should not be wiped or it will lead to electrode surface damage and the constant and response capability will be affected. The right way should be: when the electrode is dirty, soak it in 10% dilute hydrochloric acid for a short while, then rinse it with pure water to keep the surface clean.
2. The measurement cable is special cable and should not be changed at will or it will cause significant error.

Joint wire
white wire to Cell -INPUT
Yellow wire to Cell -OUPUT
Black wire-TEMP
Red wire-TEMP

JiShen Water treatment Co., Ltd.
Add: No.18, Xingong Road, High-Technology Area, Shijiazhuang,China
Tel: 0086-(0)311-8994 7497 Fax:(0)311-8886 2036
E-mail：info@watequipment.com
Website: www.watequipment.com

Product detail pictures:

Related Product Guide:

owing to excellent assistance, a variety of high quality products and solutions, aggressive costs and efficient delivery, we take pleasure in an excellent popularity amongst our customers. We are an energetic business with wide market for Good quality Hydroponic Conductivity Sensor - Online Conductivity TDS Sensor CR-102P – JIRS , The product will supply to all over the world, such as: Maldives, Mozambique, Chicago, Since the establishment of our company, we've realized the importance of providing good quality goods and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.

Do Sensor 4-20ma

Electrode

Greenhouse Ph And Conductivity

Optical Turbidity Sensor

Ph And Orp Sensor

Ph And Orp Sensor 4-20ma

Ph Sensor For Hydroponic

Resistivity Sensor 4-20ma

Seawater Ro

Tap Water Residual Chlorine Sensor

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.