PFDO-800 Fluorescence Dissolved Oxygen Sensor Operation Manual

ʻO ka wehewehe pōkole:

ʻO ka mea ʻike oxygen i hoʻoheheʻe ʻia e ana i ka oxygen dissolved ma ke ʻano fluorescence, a ua hoʻomālamalama ʻia ke kukui polū i hoʻokuʻu ʻia ma ka papa phosphor.Hoʻoulu ʻia ka mea fluorescent e hoʻokuʻu i ke kukui ʻulaʻula, a ʻo ke ʻano o ka oxygen i hoʻohālikelike ʻia me ka manawa e hoʻi ai ka mea fluorescent i ka ʻāina honua.Ma ka hoʻohana ʻana i kēia ʻano e ana i ka oxygen dissolved, ʻaʻole ia e hoʻohua i ka hoʻohana ʻana i ka oxygen, no laila e hōʻoiaʻiʻo ana i ka paʻa o ka ʻikepili, ka hana hilinaʻi, ʻaʻohe pilikia, a me ka hoʻonohonoho maʻalahi a me ka calibration.


Huahana Huahana

Huahana Huahana

Mokuna 1 Huahana

Nā kikoʻī Nā kikoʻī
Nui Anawaena 49.5mm*Loihi 251.1mm
Kaumaha 1.4KG
Mea Nui SUS316L+PVC (Manaʻo maʻamau), Alloy Titanium (Ka wai kai)
O-ring: Fluoro-rubber
Uea: PVC
Ka Waiwai IP68/NEMA6P
Laulā Ana 0-20mg/L(0-20ppm)
Mahana: 0-45 ℃
Olelo Hooholo Hoʻoholo: ± 3%
Mahana: ± 0.5 ℃
Ka Mahana Waihona -15~65 ℃
Ka Mahana Kaiapuni 0~45 ℃
Paʻi Paʻi ≤0.3Mpa
Lako ikehu 12 VDC
Hoʻolālikelike ʻO ka hoʻopili ʻana i ka ea ʻakomi, Laʻana kalibration
Ka lōʻihi o ke kelepona Uea 10-Meter maʻamau, Ka lōʻihi loa: 100 mika
Manawa Hooia 1 makahiki
Anana wahoPFDO-800 Fluorescence Dissolved Oxygen Sensor Operation Manual4

Papa 1 Dissolved Oxygen Sensor Technical Specifications

Mokuna 2 ʻIkepili Huahana
ʻO ka mea ʻike oxygen i hoʻoheheʻe ʻia e ana i ka oxygen dissolved ma ke ʻano fluorescence, a ua hoʻomālamalama ʻia ke kukui polū i hoʻokuʻu ʻia ma ka papa phosphor.Hoʻoulu ʻia ka mea fluorescent e hoʻokuʻu i ke kukui ʻulaʻula, a ʻo ke ʻano o ka oxygen i hoʻohālikelike ʻia me ka manawa e hoʻi ai ka mea fluorescent i ka ʻāina honua.Ma ka hoʻohana ʻana i kēia ʻano e ana i ka oxygen dissolved, ʻaʻole ia e hoʻohua i ka hoʻohana ʻana i ka oxygen, no laila e hōʻoiaʻiʻo ana i ka paʻa o ka ʻikepili, ka hana hilinaʻi, ʻaʻohe pilikia, a me ka hoʻonohonoho maʻalahi a me ka calibration.
Hoʻohana nui ʻia ka huahana i ka mea kanu wai, ka mea kanu wai, ke kahua wai, ka wai ʻili, ka mahiʻai, ka ʻoihana a me nā māla ʻē aʻe.Hōʻike ʻia ka hiʻohiʻona o ka oxygen sensor e like me ka helu 1.

PFDO-800 Fluorescence Dissolved Oxygen Sensor Operation Manual5

Kiʻi 1 Hoʻoheheʻe ʻia ʻo Oxygen Sensor

1- Ana uhi

2- ʻO ka ʻike wela

3- R1

4- Hui

5- Pale pale

 

Mokuna 3 Hoʻokomo
3.1 Hoʻokomo i nā mea ʻike
ʻO nā ʻanuʻu hoʻonohonoho kikoʻī penei:
a.E hoʻouka i ka 8 (papa kau) ma ke alahao ma ka loko wai me ka 1 (M8 U-shape clamp) ma ke kūlana kau ʻana o ka sensor;
b.Hoʻohui i ka 9 (adapter) i 2 (DN32) PVC paipu ma ke kāpili, e hoʻohele i ke kaula ʻike ma o ka paipu Pcv a hiki i ka wili ʻana o ka ʻike i ka 9 (adapter), a hana i ka mālama wai;
c.Hoʻopaʻa i ka 2 (DN32 paipu) ma luna o 8 (ka pā kau ʻana) e 4 (DN42U-like clamp).

PFDO-800 Fluorescence Dissolved Oxygen Sensor Operation Manual6

Kiʻi 2 Schematic Diagram ma ka hoʻokomo ʻana i ka sensor

1-M8U-hoʻopili pipili(DN60) 2- DN32 Pipe (waho anawaena 40mm)
3- Hexagon Socket Screw M6*120 4-DN42U-ʻano Paipu Clip
5- M8 Gasket(8*16*1) 6- M8 Gasket(8*24*2)
7- M8 Puna Shim 8- Papa Kaui
9-Adaptor (Uila i Pololei)

3.2 Hoʻohui o ka mea ʻike
Pono e hoʻopili pololei ʻia ka mea ʻike e ka wehewehe ʻana o ke kumu uea:

Helu Serial 1 2 3 4
Uila Nani Palaunu ʻeleʻele Polū Keʻokeʻo
hōʻailona +12VDC AGND RS485 A RS485 B

Mokuna 4 Hoʻoponopono ʻana i ka ʻike
Ua hoʻopaʻa ʻia ka sensor oxygen dissolved ma ka hale hana, a inā pono ʻoe e calibrate iā ʻoe iho, e hahai i nā ʻanuʻu ma lalo.
ʻO nā ʻanuʻu kikoʻī penei:
①Kaomi pālua i ka "06", a puka mai kahi pahu ma ka ʻākau.E hoʻololi i ka waiwai i 16 a kaomi "Send".

PFDO-800 Fluorescence Dissolved Oxygen Sensor Operation Manual8

②Hoʻomaloʻo i ka sensor a hoʻokomo i ka lewa, ma hope o ka paʻa ʻana o ka ʻikepili i ana ʻia, kaomi pālua i ka "06", e hoʻololi i ka Waiwai i 19 a kaomi "Send".

PFDO-800 Fluorescence Dissolved Oxygen Sensor Operation Manual7

Mokuna 5 Kūkākūkā Kūkākūkā
Hoʻolako ʻia ka sensor me ka hana kamaʻilio MODBUS RS485, e ʻoluʻolu e nānā i kēia ʻāpana manual 3.2 e nānā i ke kelepona kamaʻilio.ʻO 9600 ka helu baud paʻamau, hōʻike ʻia ka pākaukau MODBUS RTU kikoʻī ma ka papa aʻe.

MODBUS-RTU
Pākuʻi Baud 4800/9600/19200/38400
ʻIkepili Bits 8 bit
Hōʻoia Parity no
Kāohi Bit 1bit
Kainoa inoa HeluheluWahi ʻIkepiliʻAno Ka lōʻihi Heluhelu/Kākau wehewehe  
Waiwai Oxygen Dissolved 0 F(Luna) 2 R(heluhelu wale nō)   Waiwai Oxygen Dissolved
Hoʻoheheʻe Oxygen Concentration 2 F 2 R   Hoʻoheheʻe Oxygen Concentration
Mahana 4 F 2 R   Mahana
ʻO ka pali 6 F 2 W/R Laulā:0.5-1.5 ʻO ka pali
Waiwai Hae 8 F 2 W/R Laulā:-20-20 Waiwai Hae
paʻakai 10 F 2 W/R   paʻakai
Pumi Lewa 12 F 2 W/R   Pumi Lewa
Pākuʻi Baud 16 F 2 R   Pākuʻi Baud
Olelo Hookauwa 18 F 2 R Laulā: 1-254 Olelo Hookauwa
Manawa pane o ka heluhelu 20 F 2 R   Manawa pane o ka heluhelu
Hoʻololi Baud Rate 16 Kaulima 1 W   0-48001-96002-19200

3-38400

4-57600

Hoʻololi i ka ʻōlelo kauā 17 Kaulima 1 W Laulā: 1-254  
Hoʻololi i ka manawa pane 30 Kaulima 1 W 6-60s Hoʻololi i ka manawa pane
Hoʻolālikelike ea KaʻAnuʻu 1 27 Kaulima 1 W 16
KaʻAnuʻu 2 27 Kaulima 1 W 19
Pono e kāpae ʻia inā ʻaʻole ʻoe makemake e calibrate ma hope o ka hoʻokō ʻana o "Step 1".
Hoʻopau 27 Kaulima 1 W 21
Code hana R:03
Kākau i ka 06 ma ke ʻano he hōʻano hou 06
E kākau i ka 16 ma ke ʻano he ʻikepili lana

Mokuna 6 Ka malama ana
I mea e loaʻa ai nā hopena ana maikaʻi loa, pono e mālama mau i ka sensor.ʻO ka hoʻomaʻemaʻe, ka nānā ʻana i ka pōʻino o ka sensor, a me ka calibration manawa.
6.1 Hoʻomaʻemaʻe Sensor
Manaʻo ʻia e hoʻomaʻemaʻe ʻia ka sensor i nā manawa maʻamau (maʻamau 3 mau mahina, ma muli o ke kaiapuni pūnaewele) e hōʻoia i ka pololei o ke ana.
E hoʻohana i ka wai e hoʻomaʻemaʻe i ka ʻili o waho o ka mea ʻike.Inā loaʻa nā ʻōpala, holoi ʻia me kahi lole palupalu pulu.Mai hoʻokomo i ka mea ʻike i ka lā pololei a i ʻole kokoke i ka radiation.I ke ola holoʻokoʻa o ka mea ʻike, inā hiki ka nui o ka manawa o ka lā i hoʻokahi hola, e lilo ia i ka ʻelemakule fluorescent a hele hewa, a no laila ke alakaʻi nei i ka heluhelu hewa.

6.2 Nānā i ka Poino o ka Sensor
E like me ke ʻano o ka sensor e nānā inā he pōʻino;inā loaʻa kekahi pōʻino, e ʻoluʻolu e kelepona i ke kikowaena mālama lawelawe ma hope o ke kūʻai aku i ka manawa no ka hoʻololi ʻana i mea e pale ai i ka hana ʻino o ka sensor i hoʻokumu ʻia e ka wai mai ka pāpale pohō.

6.3 Mālama ʻia o ka ʻike
A. Inā ʻaʻole ʻoe e hoʻohana ana, e ʻoluʻolu e uhi i ka pāpale pale mua o ka huahana e pale aku i ka lā a i ʻole ka ʻike.I mea e pale ai i ka ʻike mai ka hau, pono e mālama ʻia ka ʻimi DO ma kahi e maloʻo ʻole ai.
B. Mālama i ka ʻimi maʻemaʻe ma mua o ka mālama ʻana no ka manawa lōʻihi.E mālama i nā mea hana i loko o ka pahu hoʻouna a i ʻole ka ipu plastik me ka pale haʻalulu uila.Hōʻalo i ka hoʻopā ʻana me ka lima a i ʻole nā ​​mea paʻakikī ʻē aʻe i ka wā e haki ʻia ai ka pāpale fluorescent.
C. ʻAʻole ʻae ʻia ka ʻike ʻana o ka pāpale fluorescent i ka lā pololei a i ʻole ka ʻike.

6.4 Hoʻololi i ka pāpale ana
Pono ke pani ʻia ka pāpale ana o ka mea ʻike i ka wā i poino ai.I mea e hōʻoiaʻiʻo ai i ka pololei o ke ana, ua ʻōlelo ʻia e hoʻololi i kēlā me kēia makahiki a i ʻole pono e hoʻololi ʻia ke ʻike ʻia ka pōʻino nui o ka pāpale i ka wā o ka nānā ʻana.

Mokuna 7 Mahope o ke kuai ana
Inā he nīnau kāu a makemake paha i ka lawelawe hoʻoponopono, e ʻoluʻolu e kelepona mai iā mākou e like me kēia.

ʻO JiShen Water Treatment Co., Ltd.
Hoʻohui: No.2903, Hale 9, C Area, Yuebei Park, Fengshou Road, Shijiazhuang, Kina.
Kelepona: 0086-(0)311-8994 7497 Fax:(0)311-8886 2036
E-mail:info@watequipment.com
Paena pūnaewele: www.watequipment.com


  • Mua:
  • Aʻe:

  • E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou

    Māhele huahana