PFDO-800 Fluorescence Dissolved Oxygen Sensor Operation Manual

Inkcazelo emfutshane:

I-sensor ye-oxygen edibeneyo ilinganisa i-oksijini echithwe ngendlela ye-fluorescence, kwaye ukukhanya okuluhlaza okwesibhakabhaka kukhutshwe kwi-radiated on the fosphor layer.I-fluorescent substance ivuselelwe ukuba ikhuphe ukukhanya okubomvu, kwaye i-oksijini yoxinaniso ihambelana ngokungafaniyo nexesha apho i-fluorescent substance ibuyela kwimeko yomhlaba.Ngokusebenzisa le ndlela yokulinganisa i-oksijeni echithwe, ayiyi kuvelisa ukusetyenziswa kwe-oksijeni, ngaloo ndlela iqinisekisa ukuzinza kwedatha, ukusebenza okuthembekileyo, akukho ukuphazamiseka, kunye nokufakwa okulula kunye nokulinganisa.


Iinkcukacha zeMveliso

Iithegi zeMveliso

IiNkcazo zeMveliso yeSahluko soku-1

Iinkcukacha Iinkcukacha
Ubungakanani Ububanzi 49.5mm * Ubude 251.1mm
Ubunzima 1.4KG
Umxholo ophambili SUS316L+PVC (Uguqulelo oluQhelekileyo), i-Titanium Alloy (Uguqulelo lwamanzi olwandle)
O-ring: Fluoro-rabha
Intambo: PVC
Ixabiso lokungangeni kwamanzi IP68/NEMA6P
Uluhlu loMlinganiso 0-20mg/L(0-20ppm)
Ubushushu: 0-45℃
IsiGqibo sesalathiso Isisombululo:±3%
Ubushushu: ±0.5℃
Ubushushu boGcino -15 ~ 65℃
Ubushushu beNdawo 0~45℃
Uluhlu loxinzelelo ≤0.3Mpa
Ukunikezwa Amandla 12 VDC
Ulungelelwaniso Ulungelelwaniso lomoya oluzenzekelayo, iSampuli yokulinganisa
Ubude beCable ICable ye-10-Meter Standard, Ubude obuninzi: 100 yeemitha
Ixesha lewaranti 1 Unyaka
Ubungakanani bangaphandlePFDO-800 Fluorescence Unyibilikisiwe Oxygen Sensor Operation Manual4

Itheyibhile 1 IiNgcaciso zobuGcisa beSensor ye-Oxygen echithiweyo

Isahluko sesi-2 soLwazi lweMveliso
I-sensor ye-oxygen edibeneyo ilinganisa i-oksijini echithwe ngendlela ye-fluorescence, kwaye ukukhanya okuluhlaza okwesibhakabhaka kukhutshwe kwi-radiated on the fosphor layer.I-fluorescent substance ivuselelwe ukuba ikhuphe ukukhanya okubomvu, kwaye i-oksijini yoxinaniso ihambelana ngokungafaniyo nexesha apho i-fluorescent substance ibuyela kwimeko yomhlaba.Ngokusebenzisa le ndlela yokulinganisa i-oksijeni echithwe, ayiyi kuvelisa ukusetyenziswa kwe-oksijeni, ngaloo ndlela iqinisekisa ukuzinza kwedatha, ukusebenza okuthembekileyo, akukho ukuphazamiseka, kunye nokufakwa okulula kunye nokulinganisa.
Imveliso isetyenziswa ngokubanzi kwiplanti yogutyulo, isityalo samanzi, isikhululo samanzi, amanzi angaphezulu, ukulima, ishishini kunye namanye amasimi.Inkangeleko yesivamvo se-oxygen echithiweyo iboniswa njengomfanekiso 1.

PFDO-800 Fluorescence Unyibilikisiwe Oxygen Sensor Operation Manual5

Umzobo 1 Ukuchithwa kweSensor ye-Oxygen

1- Ikhava yoMlinganiso

2-Inzwa yobushushu

3- R1

4- Ngokudibeneyo

5- Umnqwazi okhuselayo

 

Isahluko sesi-3 sokufakela
3.1 Ukufakwa kweeSensors
Amanyathelo okufakela athile angoluhlobo lulandelayo:
a.Faka i-8 (i-plate yokukhwela) kwi-railing ngase-pool kunye ne-1 (i-M8 U-shape clamp) kwindawo yokubeka inzwa;
b.Xhuma i-9 (i-adapter) ukuya kwi-2 (DN32) ipayipi ye-PVC ngeglue, udlulise intambo ye-sensor kwipayipi ye-Pcv de i-sensor screw ibe kwi-9 (i-adapter), kwaye wenze unyango olungenamanzi;
c.Lungisa i-2 (i-tube ye-DN32) kwi-8 (i-plate yokukhwela) nge-4 (i-DN42U-shape clamp).

PFDO-800 Fluorescence Unyibilikisiwe Oxygen Sensor Operation Manual6

Umzobo 2 Umzobo weSchematic kuFakelo lweSensor

1-M8U-shape Clamp (DN60) 2- DN32 Umbhobho (ngaphandle ubukhulu 40mm)
3- iHexagon Socket Screw M6*120 I-4-DN42U-shape Pipe Clip
5-M8 Gasket (8*16*1) 6-M8 Gasket (8*24*2)
7- M8 Spring Shim 8- Icwecwe lokuNzeka
9-I-Adaptor (Intambo ukuya kuthi tye-ukugqitha)

3.2 Uqhagamshelo lweSeva
Uluvo kufuneka ludityaniswe ngokuchanekileyo ngale ngcaciso ilandelayo yondoqo wocingo:

Inombolo yothotho. 1 2 3 4
Intambo yoVavanyo Ntsundu Mnyama Luhlaza Mhlophe
Umqondiso +12VDC I-AGND RS485 A RS485 B

Isahluko sesi-4 Ulungelelwaniso lweSensor
Inzwa yeoksijini enyibilikisiweyo ilinganisiwe kumzi-mveliso, kwaye ukuba ufuna ukuzilinganisa, landela la manyathelo angezantsi.
Amanyathelo athile ngala alandelayo:
①Cofa kabini u-"06", kwaye ibhokisi iphuma ngasekunene.Guqula ixabiso kwi-16 kwaye ucofe "Thumela".

PFDO-800 Fluorescence Unyibilikisiwe Oxygen Sensor Operation Manual8

②Yomisa inzwa kwaye uyibeke emoyeni, emva kokuba idatha elinganisiweyo izinzile, nqakraza kabini "06", utshintshe ixabiso kwi-19 kwaye ucofe "Thumela".

PFDO-800 Fluorescence Unyibilikisiwe Oxygen Sensor Operation Manual7

ISahluko sesi-5 soMgaqo woNxibelelwano
Inzwa ixhotyiswe nge-MODBUS RS485 umsebenzi wonxibelelwano, nceda ubhekisele kweli candelo le-3.2 lencwadana ukujonga i-wiring yonxibelelwano.Izinga le-baud elingagqibekanga yi-9600, itheyibhile ethile ye-MODBUS RTU iboniswe kolu luhlu lulandelayo.

MODBUS-RTU
Ireyithi yeBaud 4800/9600/19200/38400
Amasuntswana eDatha 8 bit
Ukujongwa kweParity no
Misa kancinci bit 1
Bhalisa Igama IdilesiIndawo IdathaUhlobo Ubude Funda/Bhala Inkcazo  
Ixabiso le-Oxygen elichithwe 0 F(Float) 2 R(funda kuphela)   Ixabiso le-Oxygen elichithwe
I-Oxygen Concentration echithwe 2 F 2 R   I-Oxygen Concentration echithwe
Ubushushu 4 F 2 R   Ubushushu
Ukuthambeka 6 F 2 W/R Uluhlu:0.5-1.5 Ukuthambeka
Ixabiso lokutenxa 8 F 2 W/R Uluhlu:-20-20 Ixabiso lokutenxa
Ubutyuwa 10 F 2 W/R   Ubutyuwa
Uxinzelelo lwe-Atmospheric 12 F 2 W/R   Uxinzelelo lwe-Atmospheric
Ireyithi yeBaud 16 F 2 R   Ireyithi yeBaud
Idilesi yobukhoboka 18 F 2 R Uluhlu: 1-254 Idilesi yobukhoboka
Ixesha lokuphendula lokuFunda 20 F 2 R   Ixesha lokuphendula lokuFunda
Inqanaba le-Modift Baud 16 Isayinwe 1 W   0-48001-96002-19200

3-38400

4-57600

Guqula idilesi yobukhoboka 17 Isayinwe 1 W Uluhlu: 1-254  
Guqula Ixesha lokuPhendula 30 Isayinwe 1 W 6-60s Guqula Ixesha lokuPhendula
Ukulinganisa Umoya Inyathelo loku-1 27 Isayinwe 1 W 16
Inyathelo lesi-2 27 Isayinwe 1 W 19
Kufuneka irhoxiswe ukuba awufuni ukwenza uhlengahlengiso emva kokuphunyezwa kwe "Inyathelo loku-1".
Rhoxisa 27 Isayinwe 1 W 21
Ikhowudi yokusebenza R:03
Bhala u-06 njengedatha yokwakheka ngokutsha 06
Bhala i-16 njengedatha yendawo edadayo

Isahluko 6 Ugcino
Ukuze ufumane iziphumo ezingcono zokulinganisa, kubaluleke kakhulu ukugcina inzwa rhoqo.Ukugcinwa ngokukodwa kubandakanya ukucoca, ukuhlola umonakalo wenzwa, kunye nokulinganisa kwexesha.
6.1 Ukucoca inzwa
Kucetyiswa ukuba inzwa kufuneka ihlambuluke ngamaxesha aqhelekileyo (ngokuqhelekileyo iinyanga ezi-3, kuxhomekeke kwindawo yesayithi) ukuqinisekisa ukuchaneka komlinganiselo.
Sebenzisa amanzi ukucoca umphezulu wangaphandle wenzwa.Ukuba kusekho inkunkuma, yisule ngelaphu elithambileyo elimanzi.Musa ukubeka inzwa kwilanga elithe ngqo okanye kufutshane nemitha.Kubo bonke ubomi be-sensor, ukuba ixesha elipheleleyo lokuvezwa kwelanga lifikelela kwiyure enye, liya kubangela ukuba i-cap fluorescent iguge kwaye ingahambi kakuhle, kwaye ngenxa yoko ikhokelela ekufundeni okungalunganga.

6.2 Ukuhlolwa kumonakalo weSensor
Ngokwembonakalo yenzwa ukujonga ukuba kukho umonakalo;ukuba kukho nawuphi na umonakalo ofunyenweyo, nceda uqhagamshelane emva kokuthengisa iziko lokugcina inkonzo ngexesha lokutshintshwa ukuthintela ukungasebenzi kakuhle kwenzwa okubangelwa ngamanzi avela kwi-cap eyonakeleyo.

6.3 Ukugcinwa kweSeva
A.Xa ungayisebenzisi, nceda ugqume ikepusi yokukhusela yemveliso ukuphepha ukukhanya kwelanga okanye ukukhanya.Ukuze ukhusele inzwa ekukhenkceni, i-DO probe kufuneka igcinwe kwindawo apho ayiyi kubanda.
B. Gcina iprobe icocekile phambi kokuba uyigcine ixesha elide.Gcina izixhobo kwibhokisi yokuthumela okanye kwisitya seplastiki esinokhuseleko lombane.Kuphephe ukuyiphatha ngesandla okanye ngezinye izinto ezomeleleyo xa ukrwela ikepusi yefluorescent.
C.Akuvumelekanga ukuba ikepusi ye-fluorescent ibe sesichengeni selanga elithe ngqo okanye ukuba sesichengeni.

6.4 Ukutshintshwa kweMeasurement Cap
Isivamvo somlinganiselo woluvo kufuneka sitshintshwe xa sonakalisiwe.Ukuze kuqinisekiswe ukuchaneka komlinganiselo, kucetyiswa ukuba uyitshintshe rhoqo ngonyaka okanye kufuneka utshintshwe xa i-cap ifunyenwe ibonakaliswe kakhulu ngexesha lokuhlolwa.

Isahluko sesi-7 emva kokuthengiswa kweNkonzo
Ukuba unayo nayiphi na imibuzo okanye ufuna inkonzo yokulungisa, nceda uqhagamshelane nathi ngolu hlobo lulandelayo.

I-JiShen Water treatment Co., Ltd.
Yongeza: No.2903, iSakhiwo se-9, indawo yeC, i-Yuebei Park, i-Fengshou Road, i-Shijiazhuang, i-China.
Umnxeba: 0086-(0)311-8994 7497 Ifeksi:(0)311-8886 2036
I-imeyile:info@watequipment.com
Iwebhusayithi esemthethweni: www.watequipment.com


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso