Isahluko 1 Imininingwane Yomkhiqizo
| Imininingwane | Imininingwane |
| Usayizi | Ububanzi 49.5mm*Ubude 251.1mm |
| Isisindo | 1.4KG |
| Indaba Eyinhloko | I-SUS316L+PVC (Inguqulo Ejwayelekile), i-Titanium Alloy (Inguqulo Yamanzi Olwandle) |
| I-O-ring: Irabha ye-Fluoro | |
| Ikhebula: PVC | |
| Isilinganiso Sokungangeni Manzi | IP68/NEMA6P |
| Ibanga Lokulinganisa | 0-20mg/L(0-20ppm) |
| Izinga lokushisa: 0-45 ℃ | |
| Isixazululo senkomba | Ukulungiswa:±3% |
| Izinga lokushisa: ±0.5℃ | |
| Izinga Lokushisa Lesitoreji | -15 ~ 65℃ |
| I-Environment Temperature | 0 ~ 45℃ |
| Ibanga Lokucindezela | ≤0.3Mpa |
| Ukunikezwa kwamandla kagesi | 12 VDC |
| Ukulinganisa | Ukulinganisa komoya okuzenzakalelayo, Ukulinganisa kwesampula |
| Ubude bekhebula | Ikhebula Elijwayelekile elingu-10-Meter, Ubude Obukhulu: Amamitha ayi-100 |
| Isikhathi sewaranti | 1 Unyaka |
Ubukhulu bangaphandle | |
Ithebula 1 Izicaciso Zobuchwepheshe Zenzwa Yomoya-mpilo Encibilikile
Isahluko sesi-2 Ulwazi Lomkhiqizo
Inzwa ye-oxygen encibilikisiwe ikala i-oxygen encibilikile ngendlela ye-fluorescence, futhi ukukhanya okuluhlaza okwesibhakabhaka okukhishiwe kukhanyiswe phezu kongqimba lwe-phosphor.Into ye-fluorescent ikhuthazwa ukuba ikhiphe ukukhanya okubomvu, futhi ukugcwala komoyampilo kuhambisana ngokuphambene nesikhathi lapho into ye-fluorescent ibuyela esimweni esiphansi.Ngokusebenzisa le ndlela yokulinganisa i-oksijeni encibilikile, ngeke ikhiqize ukusetshenziswa kwe-oxygen, ngaleyo ndlela iqinisekise ukuzinza kwedatha, ukusebenza okuthembekile, akukho ukuphazamiseka, nokufakwa okulula nokulinganisa.
Umkhiqizo usetshenziswa kabanzi embonini yokuthuthwa kwendle, embonini yamanzi, esiteshini samanzi, emanzini angaphezulu, ezolimo, ezimbonini nakweminye imikhakha.Ukubukeka kwenzwa ye-oxygen encibilikile kuboniswa njengomfanekiso 1.
Umfanekiso 1 Ukubukeka Kwenzwa Ye-Oxygen Encibilikile
| 1- Ikhava yokulinganisa | 2- Inzwa Yokushisa | 3- R1 |
| 4- Okuhlangene | 5- Ikepisi yokuzivikela |
|
Isahluko 3 Ukufakwa
3.1 Ukufakwa kwezinzwa
Izinyathelo zokufaka eziqondile zimi kanje:
a.Faka u-8 (i-mounting plate) ku-railing ngasechibini ngo-1 (i-M8-shape clamp) endaweni yokufaka inzwa;
b.Xhuma i-9 (i-adaptha) ukuya ku-2 (DN32) ipayipi le-PVC ngeglue, dlulisa ikhebula lenzwa ngepayipi le-Pcv kuze kube yilapho inzwa isikuluka ku-9 (i-adaptha), futhi wenze ukwelashwa okungangeni manzi;
c.Lungisa u-2 (ishubhu le-DN32) ku-8 (i-mounting plate) ngo-4 (i-DN42U-shape clamp).
Umfanekiso 2 Umdwebo Wohlelo Ekufakweni Kwenzwa
| 1-M8U-shape Clamp (DN60) | 2- DN32 Ipayipi (ububanzi obungaphandle 40mm) |
| 3- I-Hexagon Socket Screw M6*120 | 4-DN42U-shape Pipe Clip |
| 5- M8 Gasket (8*16*1) | 6- M8 Gasket (8*24*2) |
| 7- M8 Spring Shim | 8- Ipuleti Lokufaka |
| 9-I-adaptha(Intambo iye kuQoqo) | |
3.2 Ukuxhumana kwenzwa
Inzwa kufanele ixhunywe ngendlela efanele ngencazelo elandelayo ye-wire core:
| Inombolo yomkhiqizo. | 1 | 2 | 3 | 4 |
| Ikhebula lenzwa | Brown | Mnyama | Okuluhlaza okwesibhakabhaka | Emhlophe |
| Isiginali | + 12VDC | I-AGND | RS485 A | RS485 B |
Isahluko 4 Ukulinganiswa Kwenzwa
Inzwa ye-oxygen encibilikisiwe ilinganisiwe efekthri, futhi uma udinga ukuzilinganisa, landela lezi zinyathelo ezingezansi.
Izinyathelo eziqondile zimi kanje:
①Chofoza kabili okuthi "06", bese kuvela ibhokisi kwesokudla.Shintsha Inani libe ngu-16 bese uchofoza "Thumela".
②Yomisa inzwa bese uyibeka emoyeni, ngemuva kokuthi idatha elinganisiwe izinzile, chofoza kabili u-"06", shintsha Inani libe ngu-19 bese uchofoza okuthi "Thumela".
Isahluko sesi-5 Iphrothokholi Yezokuxhumana
Inzwa ifakwe umsebenzi wokuxhumana we-MODBUS RS485, sicela ubheke lesi sigaba semanuwali 3.2 ukuze uhlole izintambo zokuxhumana .Izinga le-baud elizenzakalelayo lingu-9600, ithebula elithile le-MODBUS RTU liboniswa kuthebula elilandelayo.
| MODBUS-RTU | |
| Isilinganiso se-Baud | 4800/9600/19200/38400 |
| Izingcezu Zedatha | 8 bit |
| I-Parity Check | no |
| Yima kancane | 1 ibhithi |
| Bhalisa Igama | IkheliIndawo | IdathaUhlobo | Ubude | Funda/Bhala | Incazelo | |
| I-Oxygen Value Encibilikisiwe | 0 | F(Float) | 2 | R (funda kuphela) | I-Oxygen Value Encibilikisiwe | |
| I-Oxygen Concentration Encibilikisiwe | 2 | F | 2 | R | I-Oxygen Concentration Encibilikisiwe | |
| Izinga lokushisa | 4 | F | 2 | R | Izinga lokushisa | |
| Umthambeka | 6 | F | 2 | W/R | Ibanga:0.5-1.5 | Umthambeka |
| Inani Lokuchezuka | 8 | F | 2 | W/R | Ibanga:-20-20 | Inani Lokuchezuka |
| Usawoti | 10 | F | 2 | W/R | Usawoti | |
| I-Atmospheric Pressure | 12 | F | 2 | W/R | I-Atmospheric Pressure | |
| Isilinganiso se-Baud | 16 | F | 2 | R | Isilinganiso se-Baud | |
| Ikheli Lenceku | 18 | F | 2 | R | Ububanzi: 1-254 | Ikheli Lenceku |
| Isikhathi Sokuphendula Sokufunda | 20 | F | 2 | R | Isikhathi Sokuphendula Sokufunda | |
| Isilinganiso se-Modift Baud | 16 | Isayiniwe | 1 | W | 0-48001-96002-19200 3-38400 4-57600 | |
| Lungisa Ikheli Lenceku | 17 | Isayiniwe | 1 | W | Ububanzi: 1-254 | |
| Lungisa Isikhathi Sempendulo | 30 | Isayiniwe | 1 | W | 6-60s | Lungisa Isikhathi Sempendulo |
| Ukulinganisa Umoya | Isinyathelo 1 | 27 | Isayiniwe | 1 | W | 16 |
| Isinyathelo sesi-2 | 27 | Isayiniwe | 1 | W | 19 | |
| Kufanele ikhanselwe uma ungafuni ukulinganisa ngemva kokusetshenziswa "kwesinyathelo 1". | ||||||
| Khansela | 27 | Isayiniwe | 1 | W | 21 | |
| Ikhodi Yomsebenzi | R:03 Bhala 06 njengedatha yokubunjwa kabusha 06 Bhala 16 njengedatha yephoyinti elintantayo | |||||
Isahluko 6 Isondlo
Ukuze uthole imiphumela engcono kakhulu yokulinganisa, kudingekile kakhulu ukugcina inzwa njalo.Ukunakekela kufaka phakathi ukuhlanza, ukuhlola umonakalo wenzwa, nokulinganisa ngezikhathi ezithile.
6.1 Ukuhlanzwa kwezinzwa
Kunconywa ukuthi inzwa kufanele ihlanzwe ngezikhathi ezithile (imvamisa izinyanga ezi-3, kuye ngendawo yendawo) ukuze kuqinisekiswe ukunemba kwesilinganiso.
Sebenzisa amanzi ukuhlanza indawo engaphandle yenzwa.Uma kusekhona udoti, sula ngendwangu ethambile emanzi.Ungabeki inzwa elangeni eliqondile noma eduze nemisebe.Kuyo yonke impilo yenzwa, uma isikhathi esiphelele sokuchayeka elangeni sifinyelela ehoreni elilodwa, kuzobangela isivalo se-fluorescent siguge futhi sihambe kabi, futhi ngenxa yalokho kuholele ekufundeni okungalungile.
6.2 Ukuhlolwa Kokulimala Kwenzwa
Ngokusho kokubukeka kwenzwa ukuhlola ukuthi kukhona umonakalo;uma kukhona umonakalo otholakalayo, sicela uthinte isikhungo sokulungisa isevisi yangemuva kokuthengisa kusenesikhathi ukuze kushintshwe ukuvimbela ukungasebenzi kahle kwenzwa okudalwe amanzi asuka kukepisi elimele.
6.3 Ukulondolozwa Kwenzwa
A.Uma ungawusebenzisi, sicela umboze isivikelo sokuqala somkhiqizo ukuze ugweme ukukhanya kwelanga okuqondile noma ukuchayeka.Ukuze kuvikelwe inzwa emakhazeni, i-DO probe kufanele igcinwe endaweni lapho ingeke iqine khona.
B.Gcina i-probe ihlanzekile ngaphambi kokuyigcina isikhathi eside.Gcina okokusebenza ebhokisini lokuthumela noma esitsheni sepulasitiki esivikelekile ngogesi.Gwema ukuyithinta ngesandla noma ngezinye izinto eziqinile uma unwaya ikepisi le-fluorescent.
C. Akuvunyelwe ukuthi isivalo se-fluorescent sichayeke elangeni noma ukuchayeka.
6.4 Ukushintshwa kwe-Measurement Cap
Isivalo sokulinganisa senzwa sidinga ukushintshwa uma sonakalisiwe.Ukuze kuqinisekiswe ukunemba kokulinganisa, kunconywa ukuyishintsha njalo ngonyaka noma kudingekile ukushintshwa lapho i-cap itholakala ilimele kakhulu ngesikhathi sokuhlolwa.
Isahluko 7 Isevisi yangemuva kokuthengisa
Uma unemibuzo noma udinga isevisi yokulungisa, sicela usithinte ngokulandelayo.
Izindleko zamasheya JiShen Water treatment Co., Ltd.
Engeza: No.2903, Building 9, C Area, Yuebei Park, Fengshou Road, Shijiazhuang, China.
Ucingo: 0086-(0)311-8994 7497 Ifeksi:(0)311-8886 2036
I-imeyili:info@watequipment.com
Iwebhusayithi esemthethweni: www.watequipment.com